Eliminate the "BLUE SCREEN", when the hard drive was moved to another computer

I've experienced this, when the computer main board is damaged then I installed a new main board with the same hard drive using the old hard drive. Is that ...? Blue screen appears or the person is usually called "the blue screen."

This arises because the blue screen windows system to detect different chipset drivers with a new main board, and there was a blue screen.

For a technician, this trick is very helpful at all if you need to check the main board without having to install from scratch. And of course who can save more time for other work.

The steps to hard disks Moved to Another Computer Without a Blue Screen:

1. The sequence is START => Control Panel => double-click System 
2. Double click on "IDE ATA / ATAPI controllers"
3.  So visible visible primary, secondary, and then type your main board chipset, usually SIS, Intel, VIA, etc.. It is this chipset and drivers you need to change to the standard default Windows drivers. If there are 2 chipset drivers are detected, then you should replace them with standard default Windows drivers.

 follow the instructions below image :

 

If there are drivers who do not change the standard to the original standard, do the same way.

Please try .... may be useful